• S8e0b77b8601a45f3b3d7ab5f806456337
  • S3231f240281745959663ed93754284fdj
  • Sfe659749ee1c4dcfb9b175a91f0d064dG
  • Sbdac33f6750f427ba7d911cd6caa3c9fl
  • Se0a0a61d546e46b391a4c4d7b34e841aF
  • S168477dbeb6943d39b83373863529fa1q
  • S7557d572a8c34139b400c91a28b504ffT
1 7

My Store

Creality HALOT-MAGE PRO/ HALOT-MAGE Pictor Film-High Speed Release Film / FEP Release Film LCD Resin 3D Printer Release Film

Creality HALOT-MAGE PRO/ HALOT-MAGE Pictor Film-High Speed Release Film / FEP Release Film LCD Resin 3D Printer Release Film

$13.98 USD
$20.97 USD $13.98 USD
Sale Sold out
Shipping calculated at checkout.
Size
Color


Creality HALOT-MAGE PRO/ HALOT-MAGE Pictor Film-High Speed Release Film / FEP Release Film Other 10-inch products LCD Resin 3D Printer Release Film



Pictor Film-High Speed Release Film

Low Release Force

Stable Release Force

Good Flexibility

Support High-speed PrintingLow Release Force Support High-speed Printing

The release force is greatly reduced by 35%,super easy to separate, and supports high-speed printing (Compared with FEP release film)Stable Release Force

The release film has uniform coating,smooth surface,stable release force,good resin release performance, and can be used repeatedlyGood Flexibility

Excellent ductility up to 300% and good flexibility can be bent 10,000 timesHigh Transmittance

The release film has high transmittance,and the UV transmittance is over 92%,which makes the printed products more accurate and perfectQuick assembly Easy to install

a. First, remove the screws at the bottom of thetray and take out the broken release film.

b.Then place the release film between the two steel frames.

c. Finally, put the assembled steel frame back into the tray and tighten screws.

d.The installed release film is as shownCompatible Models

HALOT-MAGE PRO HALOT-MAGE and other 10-inch products

Size : 286×198×0.3mmPerformance Parameter

Dynamic Friction Coefficient : 0.2

Static Friction Coefficient : 0.04

Water Contact Angle : 114

Water Contact Angle : 114

Melting Point : 310℃

Long-term Working Temperature : 260℃

Flame Retardant : 94V0FEP Release Film for Resin 3D Printer

 

High Transmittance / Cood Release Effect / Long Service LifeHigh-quality release film

The UV transmittance Over 95%

Good curing effect

With high printing accuracyStable Release Force

Hot-melt extruded cast film made of high-purity FEP resin with smooth surface, good wear resistance, stable release force, good resin release effect, and can be used repeatedly.Good Flexibility

Excellent ductility up to 300% and good flexibility can be bent 10,000 times Quick assembly Easy to install

1》Recycle the resin in the resin vat backinto the original bottle, then clean up. (Note: Please make sure there are noresidue matter left inside the Vat)

2》Remove all the screws at the bottom of the resin vat, take out the fixing plate and the release film.(Note: The fixing plate and the vat bottom need to be cleaned)

3》Gently remove the protective film on the front and back of the release film.

4》Align the release film positioning holeswith the fixing plate positioning posts.

5》Press into the bottom of the vat, andtighten the screws diagonally acrossfrom each other one at a time.(Note: Make sure there are no debris between the fixing plate and release film)

6》Make sure the release film is flat and tight after installation.(Note: If not flat or loose, please check whether the screws are locked or the release film is abnormal)Compatible Models

HALOT-MAGE PRO / HALOT-MAGE and other 10-inch productsPerformance Parameter

Size ：286×198×0.15mm

Material ：FEP

Net weight ：0.11kg

Gross weight ：0.3kg

Package size ：365×235×5mm

 



View full details