3D Printing Filament Dryer Storage Box with Fan 110W PTC Heater Constant Temperature Humidity Sensor Keeping Filament Dry

Features：

【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Sealed protection, comprehensive dust-proof and damp, no impurities

【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are displayed on the LCD indicator. (NOTE: A76/LR44 button battery ALREADY included) The default time is 6hrs, while you can also reset from 0-24hrs up to 70℃ or even infinite heating time regarding your needs. Equipped with individual humidity sensor, measurement range from 10%-99%, real-time data will be indicated by the LCD monitor

【COMPATIBLE WITH MULTIPLE SPOOLS】works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, Wood, ABS, etc. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of 3kg filament at the same time, with two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture(Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)

【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily

【100W PTC HEATER & BUILT-IN FAN】different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture

Product Specifications：

Input Voltage: AC 110V1220V 50/60Hz
Rated Power: 100w
Temperature Control Range: ≤70℃
Product Size: 213x280x305mm
Net Weight: 1.4kg Package
Size: 245x305x355mm
Total Weight: 2.0kg
Timing Length: 1min-24h or unlimited
Precision of Temperature Control: ±2℃
Maximum Capacity:
Double Reels 217x80mm
Single Reel p217x174mm
Filament Diameter: 1.75mm(need to change the Teflon Tube for 2.85mm filament)

Package Included:

1*Dryer

FAQ:

1. How it works?

Promoting the evaporation of water molecules by heating to ensure the 3D Printing Filaments are in the best condition.
>Put the filaments in.
>Turn on the button.
>Choose the relevant filament .
>Enjoy your print.

2.[Fan]Is the fan included in the Easdry?

Yes,fan is included,we have using a fan here to accelerate the heating speed inside of the dryer.in addition,Easdry also carry an air excelent circulation system,with the help of the fan,it will effcetively remove the moisture inside.

3.[Temperature sensor]Is the Temperature sensor included in the Easdry?

NO.there is no temperature inside of the easdry.we have did a lot of the test to make sure the temperature in the filament area will be evenly reach the most suitable temperature for the different type of the filament.During test,we have used Laboratory-grade Infrared Thermometer to make sure the temperature and we have attached some photo and video as reference.the result is pretty obvious from our prespective.w
we have already set up the drying temperature for the different type of filament,we believe this will be the easest for the users to finish their setting.

4.[Structure]Can i see the filament inside of the Easdry?

Yes.the'door'of the easdry is transparent.the condition of the filament can be monitored there.